Back

Adani Wind Starts Making 91.2 Metre Turbine Blades in Mundra

Adani Wind also said its MWL185-5.0 MW platform has been certified by Germany's WindGuard, clearing it for serial production.

Adani Wind: Adani logo over a long wind turbine blade on a trailer inside the Mundra blade factory

Key Takeaways

  • Adani Wind has started production of 91.2 metre onshore wind turbine blades in Mundra, Gujarat.
  • The company said these are the longest wind turbine blades made in India.
  • WindGuard Certification GmbH has certified the MWL185-5.0 MW platform, clearing it for serial production, the company said.
  • The turbine has a 185 metre rotor and a 140 metre hub height.
  • Adani Wind said its orders from power producers outside the Adani Group have crossed 1 GW.
Table of Contents 8 sections
  1. Adani Wind's 91.2 metre blade at a glance
  2. How the 5 MW platform uses the longer Adani Wind blades
  3. WindGuard certifies the MWL185-5.0 MW platform after Mundra tests
  4. Milind Kulkarni on the longer blades and lower wind sites
  5. Adani Wind's installations, orders and capacity
  6. What Adani Wind said about its manufacturing capacity
  7. Where Adani Wind stands after starting 91.2 metre blade production
  8. FAQs

Adani Wind has started production of 91.2 metre onshore wind turbine blades at its manufacturing facility in Mundra, Gujarat. The company said these are the longest wind turbine blades made in India. Adani Wind is the wind manufacturing division of Adani New Industries Limited (ANIL), a wholly owned subsidiary of Adani Enterprises.

The company also said its MWL185-5.0 MW wind turbine platform has been certified by WindGuard Certification GmbH, an independent German wind turbine testing and certification body. The company said this certification clears the way for serial production of the platform, which the new blades are made for.

Adani Wind's 91.2 metre blade at a glance

DetailValue
CompanyAdani Wind, the wind manufacturing division of Adani New Industries Limited
ParentAdani Enterprises (ANIL is a wholly owned subsidiary)
Blade length91.2 metres
PlantMundra, Gujarat
Turbine platformMWL185-5.0 MW
Rotor diameter185 metres
Hub height140 metres
Swept areaNearly 26,600 square metres
Certified byWindGuard Certification GmbH, Germany
AnnouncedNovember 16, 2026

How the 5 MW platform uses the longer Adani Wind blades

The 91.2 metre blades are built for the MWL185-5.0 MW platform. The turbine has a rotor diameter of 185 metres, which the company said is the largest in India, and a hub height of 140 metres. Adani Wind said the rotor sweeps nearly 26,600 square metres, more than three and a half standard football pitches.

The company said the platform is designed to capture more energy at sites with low and moderate wind speeds and to improve the capacity utilisation factor. The Mundra plant already makes blades of 78.6 metres and 80.5 metres, and the 91.2 metre blade adds to that range.

WindGuard certifies the MWL185-5.0 MW platform after Mundra tests

WindGuard certified the platform after prototype testing at Adani Wind's installation site in Mundra. The company said the certification confirms that the platform meets the IEC 61400 series of international standards for wind turbine design, testing and manufacturing. The MWL185-5.0 MW platform was built in partnership with W2E (Wind to Energy), a German technology company.

WhenWhat happened
April 2026Adani Wind commissions a 5 MW prototype turbine with 91.2 metre blades and a 185 metre rotor at Mundra
November 16, 2026Adani Wind starts production of 91.2 metre blades and announces WindGuard certification of the MWL185-5.0 MW platform

Milind Kulkarni on the longer blades and lower wind sites

"Producing India's longest wind turbine blade and securing certification for our 5 MW platform mark an important milestone for Adani Wind and the country's wind manufacturing sector."

Milind Kulkarni, CEO, Adani Wind

"Larger blades and higher-capacity turbines enable each machine to capture more energy, including at sites with lower wind speeds. This helps in broadening the geography available for wind generation."

Milind Kulkarni, CEO, Adani Wind

Adani Wind's installations, orders and capacity

Adani Wind said it has three turbine platforms on the Approved List of Models and Manufacturers for wind (ALMM-Wind) of the Ministry of New and Renewable Energy. The company said it is the only Indian wind turbine maker in BloombergNEF's Global Top 15 turbine manufacturers ranking for 2025.

Its MWL 160-5.2 MW platform has crossed 2 GW of installations at Khavda in Gujarat, the company said. Adani Wind also said its cumulative orders from independent power producers outside the Adani Group have crossed 1 GW following recent orders.

What Adani Wind said about its manufacturing capacity

Adani Wind said it has a manufacturing capacity of 2.25 GW and plans to expand it further. The company said its portfolio covers wind turbine platforms from 3.x MW to 5.x MW.

Where Adani Wind stands after starting 91.2 metre blade production

Adani Wind now makes blades of 78.6 metres, 80.5 metres and 91.2 metres at Mundra, and its MWL185-5.0 MW platform has been certified by WindGuard for serial production. The company said its MWL 160-5.2 MW platform has crossed 2 GW of installations at Khavda, and its orders from power producers outside the Adani Group have crossed 1 GW.

More news

Join Us Add as preferred source
Share

Frequently Asked Questions

What is Adani Wind?

Adani Wind is the wind manufacturing division of Adani New Industries Limited, a wholly owned subsidiary of Adani Enterprises.

What did Adani Wind announce on November 16, 2026?

Adani Wind said it has started production of 91.2 metre onshore wind turbine blades at its Mundra plant and that its MWL185-5.0 MW platform has been certified.

How long are the new Adani Wind blades?

The new Adani Wind blades are 91.2 metres long, and the company said they are the longest wind turbine blades made in India.

Where does Adani Wind make the new blades?

Adani Wind makes the 91.2 metre blades at its manufacturing facility in Mundra, Gujarat.

Which turbine are the Adani Wind blades made for?

The Adani Wind blades are made for the MWL185-5.0 MW platform, which has a 185 metre rotor diameter and a 140 metre hub height.

How big is the rotor on the Adani Wind 5 MW turbine?

The Adani Wind MWL185-5.0 MW turbine has a 185 metre rotor that the company said sweeps nearly 26,600 square metres.

Who certified the Adani Wind MWL185-5.0 MW platform?

WindGuard Certification GmbH, an independent German testing and certification body, certified the Adani Wind MWL185-5.0 MW platform after prototype testing at Mundra.

How does the certification help Adani Wind?

Adani Wind said the certification clears the way for serial production of its MWL185-5.0 MW platform.

Who is the technology partner for the Adani Wind 5 MW platform?

Adani Wind built the MWL185-5.0 MW platform in partnership with W2E (Wind to Energy), a German technology company.

What other blade sizes does Adani Wind make at Mundra?

Besides the 91.2 metre blade, the Adani Wind plant at Mundra makes blades of 78.6 metres and 80.5 metres.

How much capacity does Adani Wind have?

Adani Wind said it has a manufacturing capacity of 2.25 GW and plans to expand it further.

How large are Adani Wind's orders from outside the Adani Group?

Adani Wind said its cumulative orders from independent power producers outside the Adani Group have crossed 1 GW.

More in Business